Warning: file_exists(): open_basedir restriction in effect. File(/wiki/lib/tpl/monobook/user/print.css) is not within the allowed path(s): (/home/.sites/134/site1219/web:/home/.sites/134/site1219/tmp:/usr/share/pear:/usr/bin/php_safemode) in /home/.sites/134/site1219/web/wiki/lib/tpl/monobook/main.php on line 518

Hot-wire cutting

Compacfoam can be custom-cut with a precision of ±0.7mm into rods with a rectangular cross-section using a special hot-wire saw.

Hence this technology offers significantly more precision than similar standard processes for cutting low-density EPS for façade applications. The molten film created on the surface of the material lends additional smoothness to the foam structure and creates a high-quality aspect especially in the case of very small profiles. This sealing however is not sufficient to considerably increase the vapour permeability of the material.

Profile cuts with rectangular cross-section are possible but not angle cuts.

Photo profile rods hot-wire cutting

Our business partners can also process Compacfoam with multi-axis hot-wire saws. Here the attainable precision depends on the geometry and density of the material and must be tested in the individual case.

links:
Plane calibration
Milling
Sawing Compacfoam
Delivery forms and measurements




In Other Languages
QR Code
QR Code en:heissdrahtschnitt (generated for current page)