Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
en:lieferformen [2016/03/22 15:55] michaelfriembichler |
en:lieferformen [2022/03/17 14:46] michaelfriembichler |
||
---|---|---|---|
Line 13: | Line 13: | ||
Compacfoam is not offered only in these standard sizes, however. At a surcharge smaller cutting can be delivered and also larger rods or sheets using thermal welding. Hence the previously mentioned maximum dimension only applies under certain conditions. When establishing measurements, the processing limits of [[milling-machine|milling]] or [[plane-calibration|plane calibration]] as well as the transport factor must be taken into consideration. | Compacfoam is not offered only in these standard sizes, however. At a surcharge smaller cutting can be delivered and also larger rods or sheets using thermal welding. Hence the previously mentioned maximum dimension only applies under certain conditions. When establishing measurements, the processing limits of [[milling-machine|milling]] or [[plane-calibration|plane calibration]] as well as the transport factor must be taken into consideration. | ||
- | == Block sizes == | + | **Standard panel formats:** |
+ | |Material Class |Standard Length |x |Standard Width| | ||
+ | |CF100: |2,350 mm |x |780 mm| | ||
+ | |CF100: |2,350 mm |x |520 mm| | ||
+ | |CF125: |2,250 mm |x |760 mm| | ||
+ | |CF125: |2,250 mm |x |510 mm| | ||
+ | |CF150: |2,150 mm |x |680 mm| | ||
+ | |CF150: |2,150 mm |x |480 mm| | ||
+ | |CF200: |1,950 mm |x |660 mm| | ||
+ | |CF200: |1,950 mm |x |440 mm| | ||
+ | |CF300: |1,700 mm |x |600 mm *| | ||
+ | |CF300: |1,700 mm |x |400 mm| | ||
+ | |CF400: |1,600 mm |x |450 mm *| | ||
+ | |CF400: |1,600 mm |x |380 mm| | ||
+ | *not available for thickness <40mm | ||
- | ^ Density class^ Standard length ^ x ^ (condition) Maximum breadth^ | + | |Material Class |Half Standard Length |x |Standard Width| |
- | |CF100: |2.350 mm|x|550 mm| | + | |CF100: |1,175 mm |x |780 mm| |
- | |CF150: |2.150 mm|x|500 mm| | + | |CF100: |1,175 mm |x |520 mm| |
- | |CF200: |1.980 mm|x|450 mm| | + | |CF125: |1,125 mm |x |760 mm| |
- | |CF300: |1.700 mm|x|500 mm| | + | |CF125: |1,125 mm |x |510 mm| |
- | |CF400: |1.550 mm|x|450 mm| | + | |CF150: |1,075 mm |x |680 mm| |
+ | |CF150: |1,075 mm |x |480 mm| | ||
+ | |CF200: |970 mm |x |660 mm| | ||
+ | |CF200: |970 mm |x |440 mm| | ||
+ | |CF300: |850 mm |x |600 mm *| | ||
+ | |CF300: |850 mm |x |400 mm| | ||
+ | |CF400: |800 mm |x |450 mm *| | ||
+ | |CF400: |800 mm |x |380 mm| | ||
+ | *not available for thickness <40mm | ||
+ | |||
+ | |Economy |Standard length |x |Standard width| | ||
+ | |Full size: |2,350mm |x |1,160mm| | ||
+ | |Half size: |2,350 mm |x |580 mm| | ||
+ | |Quarter size: |1,160 mm |x |580 mm| | ||
+ | |||
+ | |||
+ | **Pallet quantities:** | ||
+ | |||
+ | Due to Compacfoam's manufacturing process you can order mixed panel thicknesses without extra costs. In case of sorted panels, the quantity/pallet would be as follows: | ||
+ | |||
+ | __Material class CF100 to CF200__ | ||
+ | |10 mm |20 mm |30 mm |40 mm |50 mm |60 mm |70 mm |80 mm |90 mm |100 mm| | ||
+ | |150 pc. |75 pc. |50 pc. |38 pc. |30 pc. |25 pc. |21 pc. |20 pc. |16 pc. |15 pc.| | ||
+ | |||
+ | __Material Class CF300 and CF400__ | ||
+ | |10 mm |20 mm |30 mm |40 mm |50 mm |60 mm |70 mm |80 mm |90 mm |100 mm| | ||
+ | |150 pc. |75 pc. |74 pc. |56 pc. |45 pc. |37 pc. |30 pc. |29 pc. |25 pc. |21 pc.| | ||